How To Install Bullitt Pedals on your Mustang
The stock gas pedal on my '00 Mustang was about 1" lower than the brake pedal, making it almost impossible to heel & toe on a downshift. I did the Mustangworld…...
The stock gas pedal on my '00 Mustang was about 1" lower than the brake pedal, making it almost impossible to heel & toe on a downshift. I did the Mustangworld…...
I didn't show pulling the instrument cluster out because I had the extra cluster and decided not to pull mine out and put it right back in just for this. Sorry. The…...
Stock: Take the pad bracket off of the piston. I kept the piston section on, BC I didn't wanna unhook the line or e brake. Prep for paint i hit it good…...
For the record I did no Drilling and no Splicing lines. This is the how to I wrote to help you guys out. After I installed my Accufab Plenum and 75mm Throttle…...
Ok, there's this stuff, called Seafoam, you can buy it at yoru local autoparts store, it cleans out all the carbon in your engine, and is supposed to help it run smoother.…...
What you need: 1. 3...
SN-95 Ram Air/Cold Air a corral original article Scott Winger CORRAL UNIVERSAL RATING SYSTEM: Difficulty (Easy 1-10 Difficult) Pretty Easy Special Tools (Few 1-10 Many) None Price (Cheap 1-10 Expensive) Cheap Quality…...
Tools Needed: Drill (Electric preferred) Dremel Rotary Tool Dremel Sanding Bands (60 / 120) 511E EZ Lock Finishing Abrasive Buffs - 180 & 280 grit (2 Pack) 512E EZ Lock Finishing Abrasive…...
Tools needed: 1/4" and 3/8" drive ratchets with extensions 8mm socket, 1/4" drive 10mm socket, Deep Well and regular, 1/4" AND 3/8" drive Phillips head screwdriver This install is rather straight forward.…...
Here is my new Raptor Shift Light, all ready to be installed. I decided to mount the light in the gauge cluster so I began by removing the outer trim piece. MAKE…...