18 May Hood Painted + New Wheels
After waiting patiently for 2 weeks, I got the car back from the body shop (I told him to take his time and do an A+ job which he did). It’s a Mach 1 hood w/ Mach 1 Shaker system, flat black stripe painted on the hood, and new 17″ deep dish anthracite Bullitt style wheels to go w/ the new dropped look.
Parts:
-
- The stripe is painted, not decal. Also that’s just a glare on the front bumper, not any damage. He totally repainted the front bumper.
Links may earn me commissions. As an Amazon Associate I earn from qualifying purchases.
Chris G.
Posted at 12:00h, 19 August 2008grinding bracket
I bet you grinded that bracket when pops wasn’t lookin. ;-p
Mike
Posted at 12:02h, 19 August 2008haha I did that @ home
John
Posted at 05:46h, 31 August 2008Mustang
Beautiful Car, Best color on Gt.
William Miller
Posted at 13:08h, 2 November 2008shaker
Hey,
I have the CDC shaker kit on my 02 Mineral Grey GT, and at speeds above 80mph the shaker hood begins to vibrate or fluctuate up and down rapidly, causing the hood itself to fluctuate up and down as well. I was wondering if you have the same problem.
Mike
Posted at 13:41h, 2 November 2008Hey thanks for looking at my site…My shaker system doesn’t vibrate or fluctuate at all at any speeds. Make sure all the bolts are tight that attaches the scoop to the motor. How many miles does your engine have? It is likely your motor that is vibrating, but I could be wrong. Shoot me an e-mail and I may be able to help you a little better.
Jay
Posted at 00:42h, 4 January 2009beautiful car man
Michael
Posted at 23:17h, 18 February 2009shaker hood clearance
Did you have to shave the horns on the cobra bumper to get the shaker hood to fit correctly, or is the shaker a short hood like the cobra? I just got the cobra front end for my 04 gt, and i want the shaker hood, but i dont want to shave the horns to fit my gt hood if it is gonna mess up the line for the shaker hood.
Mike
Posted at 23:47h, 18 February 2009You don’t have to touch the horns at all. The install was very simple, direct bolt on…however the company I bought the brackets to hold the shaker from does not sell them anymore so you will have to make your own. You could also adapt the CDC shaker to fit the stock Mach 1 hood. There’s a write-up on the site here.
Johnny14
Posted at 08:24h, 14 March 2009Sweet site man. one
Kyle Leech
Posted at 18:05h, 19 August 2009that looks sick man.
did the shaker hood add any noticeable horsepower?
Mike
Posted at 21:25h, 19 August 2009Hey, thanks for the compliments. To be honest with you I didnt feel any notice at all. I would say at most it gave me 0-5 HP.
Eric Gordon
Posted at 15:43h, 20 August 2009I have an 01 gt same color love the car
i like what you have done with the hood and the car itself.
really looks cool.
TBapp
Posted at 15:00h, 22 August 2009beautifull car how is the vortech supercharger i was checking them out but now im leaning towards a twin screw
Mike
Posted at 19:59h, 22 August 2009Thanks man, the Vortech is great. What kind/year of Mustang do you have?
George
Posted at 22:26h, 22 September 2009my gt is black .nice car
01GT
Posted at 11:23h, 26 September 2009Nice ride…
Here is mine…
Mike
Posted at 17:14h, 13 November 2009Very nice!! What do you have done to it? Looks like a nice launch.
01GT
Posted at 16:48h, 27 December 2009Pulleys,Bullit Intake,C@L Cold Air Tube,Fuel Rails,3.73 Gears,31 spline Mosers,Pro 5.0 shifter.100 shot(But the pic was taken on a 6000rpm Muscle leave)
i271.photobucket.com
i271.photobucket.com
i271.photobucket.com
I drive It back and forth to work everyday and drive it like I stole it at the Track…
Mike
Posted at 16:50h, 27 December 2009Looking good! Whats you’re best time?
01GT
Posted at 20:23h, 13 March 201013.15 on Muscle…
Spray100shot the Intake blew a hole in it at the 1/8 mile mark and it coasted the other 1/8 to a 12.45 at 110…
Not bad for coasting half the way …LOL!!!
Mike
Posted at 20:32h, 13 March 2010Oh man! Still a great time minus the tragedy, lol
Dan
Posted at 16:26h, 11 April 2010Nice car
Like your bullitt wheels. Been thinking about getting larger ones for the rears. Where did you get them? What mods were you running to get 13.1 on all motor?
Mike
Posted at 10:20h, 12 April 2010Thank you, they are perfect for the car. I ended up getting them from American Muscle, there is a link in Mike’s Picks
naomi
Posted at 01:57h, 18 July 2010very excited about that american flag picture
pretty sweet deal! im looking to buy but need to know what payment options i may have??? 
thanks much… talk to ya soon….
n~
Mike
Posted at 10:39h, 29 July 2010Thank you very much. What do you mean what payment options?
Daisy
Posted at 17:44h, 13 October 2010Bumper
Love that color it looks amazing. I have a silver and was wondering where you got the front bumper, It looks great and mine needs a replacement… Thnks
robert
Posted at 22:15h, 7 June 2011MACH 1
i have a gray shadow mach 1. the front bumper looks great. im thinking to get one of those. nice car.
JPod78
Posted at 13:55h, 12 September 2011This is exactly what I want my 01 Gt to look lie great job….and glad to see that my vision will look awsome
mike
Posted at 20:55h, 13 September 2011Re:
Good luck, make sure to comment with a picture when you are done!
Kelvin Williams
Posted at 15:13h, 7 February 2012your
hey i just bought a 2002 GT and I put some deep dish 17″ rims was wondering how much did you drop yours I like the way it sits.
Jerry Schwambach
Posted at 16:41h, 8 October 2018Hood design
Your car looks great. Just what I want to do with my 2000
GT.
Did you need to replace the hood with as shaker hood and if so where did you find one?